.jpg)
L&T-Sargent & Lundy (L&T-S&L) is a globally
recognized plant engineering and design center with a proven track record of
delivering over 100 GW of projects over the past three decades across various
geographies. The company is at the forefront of engineering large-scale
international projects, including gas-based combined cycle, renewable and
hybrid, seawater reverse osmosis (SWRO), waste-to-energy, geothermal, and
re-powering thermal projects.
L&T-S&L is now inviting experienced professionals
for walk-in interviews at Bengaluru, Pune, and Kolkata. This is an exciting
opportunity to join a world-class organization and contribute to significant
global projects.
Outline of the Article
- Introduction
- Overview
of L&T-S&L
- Importance
of the Walk-in Interviews
- About
L&T-Sargent & Lundy
- Brief
History and Achievements
- Areas
of Expertise
- Why
Join L&T-S&L?
- Global
Impact and Opportunities
- Work
Culture and Environment
- Details
of the Walk-in Interview
- Locations
and Dates
- What
to Expect
- Roles
and Positions Available
- Sr.
Engineer/Designer (4-6 years)
- Asst.
Manager/Manager (7-14 years)
- Lead
Engineer / Domain Expert / Lead Designer (15-20 years)
- System/Equipment/Physical
Design Engineering
- Mechanical
System/Equipment
- Main/Reheat
Steam, Feed Water, Condensate, Bypass, Steam Extraction & Drain
System
- Utility/BOP,
Circulating Water, Water Treatment, Compressed Air, Fuel Gas/Fuel Oil,
Fire, HVAC, Material Handling
- Gas
Turbine/Steam Turbine, HRSG/Boiler, Condenser, Heater, Boiler Feed Pump,
Condensate Extraction Pump, CW Pump, Cooling Tower, Compressor
- Piping
(Stress and Layout)
- Piping-Stress,
Material, and Support Engineering
- Plot/Site
Layout, Equipment & Piping GADS, ISOS, Support, MTOS
- Electrical
System/Equipment
- LV/MV/EHV,
Generator and Aux, Transformer, Cable Sizing, AIS/GIS, Transmission Line,
and Power Systems Studies
- Electrical
Equipment Layout, Cable Raceway Layout, Lighting, and Earthing, MTO
- Civil
& Structural Engineering
- Structural
Steel & RCC Building/Structure
- Dynamic/Static
Equipment Foundation
- Geotechnical,
Area Grading, Roads & Drainage
- Structural
Steel and Reinforced Concrete Detailing
- Instrumentation
& Control
- Instruments,
Control Valves, DCS, PLC, and Logic Diagrams
- Control/Electronic
Room Layout, Installation Schemes
- Renewable
Energy
- Solar/Wind/Battery
Storage/Hybrid
- Software
Proficiency Required
- Tools
and Technologies
- Job
Locations
- Detailed
Overview of Locations
- How
to Prepare for the Interview
- Tips
and Best Practices
- What
to Bring
- Conclusion
- Recap
of Opportunities
- Encouragement
to Attend
- FAQs
- Common
Questions and Answers
Article
Introduction
Are you an experienced professional looking to make a
significant impact in the world of plant engineering and design?
L&T-Sargent & Lundy (L&T-S&L) is offering a fantastic
opportunity for skilled individuals to join their team through a series of
walk-in interviews in Bengaluru, Pune, and Kolkata. This could be your chance
to be part of a company that has engineered over 100 GW of projects globally
and is involved in some of the most exciting and challenging projects in the
industry.
About L&T-Sargent & Lundy
L&T-S&L is a powerhouse in the field of plant
engineering and design. Over the last three decades, the company has
established itself as a leader, delivering cutting-edge solutions across
various industries. Whether it's gas-based combined cycle projects, renewable
energy, or waste-to-energy plants, L&T-S&L has been at the forefront,
driving innovation and excellence.
Brief History and Achievements
Founded as a collaboration between Larsen & Toubro
(L&T) and Sargent & Lundy, the company has a rich history of success.
With a focus on engineering excellence, L&T-S&L has consistently
delivered high-quality projects, setting benchmarks in the industry.
Areas of Expertise
L&T-S&L specializes in a wide range of engineering
services. From mechanical and electrical systems to civil and structural
engineering, the company covers all aspects of plant design and execution.
Their expertise extends to both conventional and renewable energy sectors,
making them a versatile player in the global market.
Why Join L&T-S&L?
Joining L&T-S&L means becoming part of a team that
works on large-scale international projects. It’s not just a job; it’s an
opportunity to contribute to projects that have a global impact. The company
offers a collaborative work environment where innovation and creativity are
encouraged.
Global Impact and Opportunities
L&T-S&L’s projects span across the globe, providing
employees with the chance to work on diverse and challenging assignments.
Whether it's in Asia, Europe, or the Americas, the company's footprint is
extensive, offering unparalleled exposure to international projects.
Work Culture and Environment
The work culture at L&T-S&L is built on the pillars
of integrity, excellence, and teamwork. Employees are encouraged to bring their
best to the table, with a focus on continuous learning and professional
development. The company’s commitment to diversity and inclusion ensures that
all employees feel valued and respected.
Details of the Walk-in Interview
L&T-S&L is conducting walk-in interviews at three
major locations: Bengaluru, Pune, and Kolkata. These interviews are an
excellent opportunity for professionals to join a leading company in the
engineering sector.
Locations and Dates
- Bengaluru:
L&T Technology Services Ltd, Tower 51, Ground Floor, L&T Tech Park
Near Phoenix Mall of Asia, Bellary Road, Bengaluru -560 092
- Pune:
Larsen & Toubro Limited - Pune, L&T House, 191/1, Dhole Patil
Road, Pune-411-001
- Kolkata:
Taj Taal Kutir, Kolkata, Eco park, Plot No.: IIE/65, Action Area-II, New
town, Rajarhat, Kolkata-700 156
Date: 24th August 2024 (Saturday)
Time: 9:30 a.m. onwards
What to Expect
Candidates attending the walk-in interviews should be
prepared to present their resumes and discuss their qualifications and
experience. The interview process will include discussions on technical
expertise, project experience, and the candidate’s ability to contribute to
ongoing and future projects.
Roles and Positions Available
L&T-S&L is looking for experienced professionals to
fill a variety of roles. The positions available are:
Sr. Engineer/Designer (4-6 years)
Professionals with 4-6 years of experience in engineering
and design are encouraged to apply. These roles involve working on complex
projects and require a deep understanding of engineering principles and
practices.
Asst. Manager/Manager (7-14 years)
Candidates with 7-14 years of experience can apply for Asst.
Manager/Manager positions. These roles involve managing teams, overseeing
project execution, and ensuring that projects meet quality and safety
standards.
Lead Engineer / Domain Expert / Lead Designer (15-20
years)
For those with 15-20 years of experience, L&T-S&L is
offering roles as Lead Engineers, Domain Experts, or Lead Designers. These
positions require extensive experience in engineering and design, as well as
leadership skills to guide teams through complex projects.
System/Equipment/Physical Design Engineering
L&T-S&L specializes in various aspects of system and
equipment design. The roles available cover a wide range of engineering
disciplines.
Mechanical System/Equipment
This area includes the design and engineering of mechanical
systems and equipment, such as turbines, boilers, and compressors.
Main/Reheat Steam, Feed Water, Condensate, Bypass, Steam
Extraction & Drain System
Engineers specializing in these systems will work on
critical components of power plants, ensuring efficiency and reliability.
Utility/BOP, Circulating Water, Water Treatment,
Compressed Air, Fuel Gas/Fuel Oil, Fire, HVAC, Material Handling
This involves designing and managing utilities and balance
of plant systems that are essential for the smooth operation of facilities.
Gas Turbine/Steam Turbine, HRSG/Boiler, Condenser,
Heater, Boiler Feed Pump, Condensate Extraction Pump, CW Pump, Cooling Tower,
Compressor
Specialists in these areas will focus on the design and
optimization of key equipment in power generation and industrial plants.
Piping (Stress and Layout)
Piping is a crucial aspect of plant design, and
L&T-S&L is looking for experts in this field.
Piping-Stress, Material, and Support Engineering
This role involves analyzing and designing piping systems to
withstand various stress factors while ensuring safety and compliance with
standards.
Plot/Site Layout, Equipment & Piping GADS, ISOS,
Support, MTOS
Professionals in this area will be responsible for the
layout and design of piping systems, ensuring they integrate seamlessly with
other plant components.
Electrical System/Equipment
L&T-S&L is also hiring for roles in electrical
system design and engineering.
LV/MV/EHV, Generator and Aux, Transformer, Cable Sizing,
AIS/GIS, Transmission Line, and Power Systems Studies
This area covers a wide range of electrical engineering
tasks, from designing low to high voltage systems to conducting power system
studies.
Electrical Equipment Layout, Cable Raceway Layout,
Lighting, and Earthing, MTO
These roles involve designing layouts for electrical
equipment, ensuring proper installation and safety measures are in place.
Civil & Structural Engineering
Structural integrity is a key aspect of any engineering
project, and L&T-S&L is seeking experts in civil and structural
engineering.
Structural Steel & RCC Building/Structure
This involves designing and constructing steel and
reinforced concrete structures that form the backbone of industrial facilities.
Dynamic/Static Equipment Foundation
Engineers in this area will design foundations for dynamic
and static equipment, ensuring stability and durability.
Geotechnical, Area Grading, Roads & Drainage
These roles involve assessing and designing the
infrastructure necessary to support plant operations, including grading, roads,
and drainage systems.
Structural Steel and Reinforced Concrete Detailing
This involves creating detailed designs and drawings for
steel and concrete structures, ensuring they meet all safety and regulatory
requirements.
Instrumentation & Control
Instrumentation and control are vital for the safe and
efficient operation of any plant.
Instruments, Control Valves, DCS, PLC, and Logic Diagrams
This role involves designing and implementing control
systems that regulate plant operations.
Control/Electronic Room Layout, Installation Schemes
Professionals in this area will design layouts for control
rooms and oversee the installation of control systems.
Renewable Energy
L&T-S&L is also expanding its focus on renewable
energy projects.
Solar/Wind/Battery Storage/Hybrid
These roles involve designing and engineering renewable
energy systems, including solar, wind, and battery storage solutions.
Software Proficiency Required
Candidates should be proficient in various software tools
used in engineering design and project management.
Tools and Technologies
Some of the key software proficiencies required include:
- GATECYCLE/GT
PRO/Steam PRO
- CAESAR-II/ROHR,
PIPENET/AFT
- HAP/Elite,
3D CAD tools (e.g., SP3D/PDS/PDMS/E3D, Revit)
- ETAP,
PSCAD, PSSE, CDEGS, DIALux
- PVSyt,
Primavera, PVcase
- STAAD-PRO,
ETABS, SAFE, SAP, PLS-CADD, TEKLA, Revit, Civil 3D, GeoStudio, PLAXIS
- AutoCAD,
Microstation, MS Office, Power BI
Job Locations
L&T-S&L has specific job locations for different
roles:
- Electrical
domain: Kolkata and Vadodara
- All
other domains: Vadodara
How to Prepare for the Interview
Preparing for a walk-in interview can be challenging, but
with the right approach, you can make a great impression.
Tips and Best Practices
- Update
Your Resume: Ensure your resume is up-to-date and highlights your
relevant experience and skills.
- Research
the Company: Familiarize yourself with L&T-S&L’s projects and
areas of expertise.
- Practice
Interview Questions: Be prepared to discuss your experience and how it
relates to the positions you’re applying for.
What to Bring
Candidates should bring a copy of their resume to the
interview. It’s also important to write the position and role applied for on
the top of the page.
Conclusion
The L&T-S&L walk-in interviews at Bengaluru, Pune,
and Kolkata are a golden opportunity for experienced professionals to join a
leading engineering and design firm. Whether you’re looking to advance your
career or make a significant impact in the industry, L&T-S&L offers the
perfect platform. Don’t miss this chance to be part of a company that’s shaping
the future of engineering.
FAQs
- What
qualifications are required for the available positions?
Candidates should have an M.Tech/M.E., B.Tech/B.E., or Diploma qualification, along with relevant experience in their respective fields. - Can
I apply for multiple positions?
Yes, you can apply for multiple positions, but ensure that your experience and qualifications match the requirements for each role. - What
if I can’t attend the walk-in interview?
If you’re unable to attend the walk-in interview, you can send your resume to [email protected]. - Is
there any fee for the interview process?
No, L&T does not charge any fees at any stage of the recruitment process. Beware of any fraudulent requests for payment. - What
is the work culture like at L&T-S&L?
L&T-S&L offers a collaborative and inclusive work environment, with a strong emphasis on professional growth and development.